Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at FLSmidth Sioux City, 2320 ORCHARD DRIVE EAST, TWIN FALLS, IDAHO 83301
on — Amputations, affecting the fingertip(s).
Watch FLSmidth Sioux City — freeGet an email when a new federal OSHA severe-injury report for FLSmidth Sioux City is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was rolling a kiln as part of scheduled maintenance when the kiln stopped rolling. As the employee checked on the kiln, the employee's left middle finger got too close to a belt or blade, resulting in a fingertip amputation.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311313)
An employee was helping change out socks on hard thin juice filters, part of a beet sugar manufacturing operation. While the filter lid was being removed, juice started leaking down the side of the filter. This suggested that the juice was bypassing the seat on the main shutoff valve. While the main shutoff was being checked, the valve was opened and sprayed hot juice on the employee. The employee suffered burns to the left arm, the left ribcage area, the left side of the back, and the left side of the face. The employee was hospitalized.
An employee was removing a beet elevating belt while mechanics were cutting a hole in the center of the belt to install the pulley point using an oscillating tool with a hook blade. The tool popped out of the belt and the tool struck the injured employee in the stomach, resulting in a laceration on the lower left abdomen.
An employee was troubleshooting the precoat/overflow tank when scalding liquid (juice) began to leak out of the tank and contacted the employee. The employee was hospitalized for burns.
An employee was clearing a jam in the bag sealer machine in the warehouse when his right thumb was caught in the belt and pulley, resulting in amputation of the thumb tip.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.