Gulf Interstate Engineering

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

Employees were conducting a snubbing operation. While making up the tubing swivel onto the joint in the mouse hole, employee 2 proceeded to pull power tongs off the pipe. At the same time, the injured employee went to re-adjust the tong heads. The make/brake handle was pulled and the injured employee's right hand got caught in the tongs. The injured employee's index, middle, and ring fingers were amputated and he required surgery.

On 9/26/2025, an employee was using a pair of scissors to cut a zip-tie that was securing a box of files. The scissors slipped and lacerated the employee s left wrist. The employee was hospitalized.

An employee had been taking fuel samples from the top of a barge. The employee was hospitalized with heat exhaustion.

An employee was troubleshooting and rodding out a piece of process piping equipment when their left index finger was caught between the tool handle and threaded flange. The employee's fingertip was partially amputated.

An employee was walking in steel-toed boots when his left foot struck a pallet jack, resulting in partial amputation of a toe.

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.