Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Plastek Industries-CPD, 2310 Pittsburgh Avenue, ERIE, PENNSYLVANIA 16506
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Watch Plastek Industries-CPD — freeGet an email when a new federal OSHA severe-injury report for Plastek Industries-CPD is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was building an automation machine when a part jammed in the machine. The employee reached in to grab the jammed part and the machine cycled. The employee suffered an amputation of the pinky finger on his left hand.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326121)
An employee was blowing out material in the blow-out booth when the silo magnet came down on his left hand, amputating the index and middle fingertips.
At the maintenance shop, an employee was drilling plastic parts using a drill press. The employee's left glove got caught in the drill, and half of her left ring finger and her left little fingertip were amputated.
A maintenance technician was servicing an extruder and removed the cam locking pin on a hot water/steam line to change a water hose. Hot water/steam sprayed out, striking the employee on the right forearm and the right side of their neck. The employee sustained burns to their neck, right forearm, and right leg.
An employee was entering an area while carrying a tray containing 20 pounds of product. A plastic curtain came into contact with the employee's shoulder; the employee suffered a herniated disc while dislodging the curtain.
An employee was working on a cutting line that utilized a machine to pull material through the line. The employee was turning a roller to feed material into the machine when their left hand was caught between the rollers, resulting in abrasions and a dislocated thumb. The employee was hospitalized and required surgery on the thumb.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.