FIRESTONE BUILDING PRODUCTS CO.

An employee was folding a 45' W by 100' L rubber sheet when she fell backwards, striking her head on the concrete ground and suffering a brain bleed.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was installing a fuse in a machine cabinet. An arc flash burned the employee's left arm, and the employee was hospitalized.

An employee was standing on the back of a flatbed truck while a forklift was being used to load a shelving unit onto the truck. The shelving unit slid off and struck the employee, who suffered contusions to the head and collarbone area.

An employee was operating an order picker that was raised 20 inches when they stepped backward and fell off the platform to the concrete floor. The employee struck their head on the floor, resulting in hospitalization with a head injury.

An employee was operating a side loader designed for narrow aisles to pick up pans filled with steel, which include 12-foot pans and others with 20-24 foot pans. The employee pulled the required amounts from the pans using a crane, and then packed and labeled the items for shipment to the loading dock. The side loader struck a pan, causing the cab to detach and land on the employee's leg, resulting in a fracture.

A delivery driver was helping a customer unload a strut. The banding around the strut broke loose and lacerated the employee's lower left leg. The employee was hospitalized and required stitches and surgery to repair the patellar tendon.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.