Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Diemolding Corporation, 100 Donald Hicks Dew Dr., WAMPSVILLE, NEW YORK 13163
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was adjusting air nozzles on a grinder and removing jammed parts. His little finger was amputated between a part and the grinding wheel.
An employee was clearing scrap from the exit end of a preformer machine when his middle finger was caught in the machine punch, cutting and amputating his fingertip. The machine was guarded at the time.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
On March 26, 2025, at approximately 11:45 AM, an employee was operating a forming machine and sustained the amputation of their right middle finger. The machine was guarded at the time.
An employee was throwing garbage into a baler when they slipped, twisted their knee, and fell on their backside. The employee sustained a sprained left knee and was hospitalized.
On May 15, 2024, an employee was emptying a scrap hopper with a powered industrial vehicle (PIV) when their left hand was caught between the scrap hopper and the PIV fork. They sustained an amputation of the ring fingertip.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.