Philip's Bedding Inc.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

On April 14, 2025, an employee was fixing a belt on a mattress tape machine. The belt had folded over; as he was unfolding it, it caught his right ring finger and pulled it into a roller. He suffered a partial amputation through the finger bone.

An employee was stepping down from an order picker when they tripped over the forks of another electric pallet jack that was parked nearby and fell to the ground. The employee sustained a displaced pilon fracture to their left tibia.

An employee was using a rotary saw and lacerated their left index and middle fingers, resulting in an amputation that required hospitalization.

On January 11, 2023, an employee was operating a saw machine. He stepped onto the cutting table and fell backward approximately 20 inches onto the floor. He struck his head and neck on the metal frame of the equipment and was hospitalized.

The injured employee had been using a powered industrial truck to unload a delivery of foam buns coming into the plant. He went to assist the operator of a carousel saw in getting a foam bun to go through the saw. The injured employee got on top of the foam bun which was on the saw table and his hands and knees depressed into the bun. His left kneecap was lacerated by the saw blade as the bun went through the saw. The employee was hospitalized with tendon damage that required surgery.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.