Caught in running equipment or machinery during regular operation · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Chain Electric Company, Inc., Power South Facility, JACKSON, ALABAMA 36545
on — Fractures, affecting the finger(s), fingernail(s), unspecified.
Watch Chain Electric Company, Inc. — freeGet an email when a new federal OSHA severe-injury report for Chain Electric Company, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was undoing a snag of wire splice hung up on a pole. The wire snagged the employee's left glove, pulling the employee's hand into the wire rollers; the employee's left thumb suffered several fractures.
A five-member crew was replacing a wood utility pole. One of them was at the hole, removing the cover over it, while a utility truck was lifting the pole. The rigging rope that was lifting the pole broke; the pole fell, struck a retaining wall, bounced, and fell to the ground, striking the injured employee. The employee's right arm was amputated above the elbow.
A five-member crew was replacing a wood utility pole. As the pole was being lifted by a utility truck, the injured employee was removing the cover that was over the hole. The pole fell from the rigging and struck a retaining wall, bounced, and then fell to the ground striking the injured employee. The employee's right arm was amputated above the elbow. The employee also sustained injury to their right leg.
On August 15, 2022, at approximately 3:30 p.m. an employee was performing construction on powerlines when he reported that he was not feeling well and was having pain and tingling in his lower right arm. The employee was instructed to get in the cab of a bucket truck to cool down and drink fluids. After approximately fifteen minutes, the employee was lying beside the truck with pain and cramping to his arms and legs. The employee was hospitalized for heat stroke.
An employee was installing an overhead electrical power line. The tool the employee was using contacted the ground creating a direct short. The employee was hospitalized for electrical flash burns to the face.
A crew was changing out a single phase pole with a transformer on it. Work on the pole was completed and the cover-up was being removed when an employee noticed the animal guard that was installed on the arrestor was not in its proper place. As he attempted to correct it, he came in contact with energized parts while his elbow contacted a grounded surface. He received second degree electrical burns on his right arm.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 238210)
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.