CCN International, Inc.

An employee was attempting to dislodge a chuck of dried glue from a glue spreading machine when the rollers started moving and caught his finger between two rollers. His fingertip was amputated.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was working with an up-cut saw. The pedal to start the machine actuated and the employee's left hand was caught in the area where wood is fed into the saw. The saw blade amputated their left index and middle fingers.

A employee was using a reach truck to retrieve material when their left foot became caught between the reversing reach truck and the vertical shelf structure behind the reach truck, resulting in fractures to the fourth and fifth digits.

On June 14, 2024, an employee was forming a part on the hydraulic brake press and suffered a partial amputation of the left middle finger through the nailbed.

A maintenance technician was working on an exhaust fan on the roof of the facility. Their gloved hand contacted the running belt and was pulled into the pulley, amputating their right index fingertip, just below the fingernail.

An employee went to change tooling on a routing machine when the machine crushed and cut his left thumb, ring, and little fingers.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.