PALRAM P2000, Inc.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was blowing out material in the blow-out booth when the silo magnet came down on his left hand, amputating the index and middle fingertips.

At the maintenance shop, an employee was drilling plastic parts using a drill press. The employee's left glove got caught in the drill, and half of her left ring finger and her left little fingertip were amputated.

A maintenance technician was servicing an extruder and removed the cam locking pin on a hot water/steam line to change a water hose. Hot water/steam sprayed out, striking the employee on the right forearm and the right side of their neck. The employee sustained burns to their neck, right forearm, and right leg.

An employee was entering an area while carrying a tray containing 20 pounds of product. A plastic curtain came into contact with the employee's shoulder; the employee suffered a herniated disc while dislodging the curtain.

An employee was working on a cutting line that utilized a machine to pull material through the line. The employee was turning a roller to feed material into the machine when their left hand was caught between the rollers, resulting in abrasions and a dislocated thumb. The employee was hospitalized and required surgery on the thumb.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.