Shaw Industries, Inc.

On August 14, 2025, an employee was rebuilding a tile-cutting die when their right wrist contacted the cutting blade, resulting in a laceration that required hospitalization.

On March 25, 2025, at approximately 12:45 PM, an employee was operating a miter saw to cut wood flooring samples. The workpiece shifted, pulling the employee's left hand into the saw blade and resulting in the amputation of the distal phalanx of the middle finger.

While performing routine maintenance on equipment an employee manually rotated the baffle bracket. The employee's fingers were pinched between a baffle and the support frame resulting in a fingertip amputation and lacerations.

An employee was operating a forklift to move a bale of yarn onto a waste scale. After aligning the yarn to the scale, the employee began to back the forklift out. The scale became caught on one of the forklift tines. The employee exited the forklift and attempted to move the yarn bale from the tine. As the bale began to shift, the employee positioned himself to provide resistance against the bale, resulting in a dislocation of the right knee.

On September 24, 2022, an employee slipped and fell to the ground after exiting a building. The employee suffered a hyperextended left knee.

An employee was on a double-end rider in an aisle selecting product when his left leg was pinned between the rack and rider.

An employee was using a forklift to load a tractor trailer when the forklift skidded into a wall. The employee sustained an arm fracture.

An employee was training on an rolling container carrier on the dry, non-frozen storage side of the distribution center. She made a turn around the end cap and her right foot struck the rail protecting the endcap racking. The employee's foot was fractured.

An employee was a passenger in a utility vehicle that was driving up a hill on a wooded trail. As the vehicle made a right turn, three fingers on the employee's right hand were caught against a tree and fractured.

An employee was operating a forklift when his left leg was caught between the forklift and a bollard resulting in a broken leg.

An employee was assisting with maintenance and servicing a conveyor that was making an unusual noise. The employee's right arm got caught in the conveyor between a belt and a roller. Their right hand and arm were crushed, resulting in amputation of the arm.

An employee was using a skid loader to clean an area of loose debris (straw shed). He was lowering the bucket when the arms/bucket of the skid loader pinned his feet against the step of the loader. The employee sustained fractures to both feet and was hospitalized.

An employee was stepping over a brace bar when they tripped and fell to the concrete floor, resulting in a fractured forearm and dislocated elbow.

An employee was on a step ladder loading product. They fell off the step ladder and sustained a fractured back and hip.

A Merit Logistics employee was pushing an egg crate out of a trailer. While working to get it over the lip of the dock, she lost her footing. Crates fell on her, breaking her tibia.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.