Fall on same level due to tripping over an object · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Madix, Inc, 500 Madix Rd, ECLECTIC, ALABAMA 36024
on — Fractures, affecting the hip(s).
Final narrative
While pulling a pallet off a roller bed conveyor, an employee tripped over a ground-mounted forklift guardrail. The employee fell to the ground, suffering a broken right hip. The employee was hospitalized.
An employee was feeding scrap metal into a chipper when his right hand was squeezed against a metal component of the machine. He suffered an amputation to the right index finger at the second joint.
On April 10, 2025, an employee was operating a brake press when two of its dies pinched her left ring and middle fingers. She suffered amputations to both fingertips, just above the fingernails. The machine was guarded with a light curtain at the time of the incident.
An employee was using a forklift to move a piece of angle iron. The angle iron slipped off the forklift and hit the employee's right foot resulting in a toe amputation.
An employee was manufacturing parts on a roll former machine. He went to remove the parts and his right hand became caught between the parts and the guard, resulting in partial amputation of his ring finger.
On March 23, 2023, at approximately 9:00 AM, an employee was operating an automated saw. As the employee went to adjust the coolant sprayers, the rotating blades caught his glove and pulled his hand in, resulting in three left-hand finger amputations.
An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.
On August 13, 2025, an employee was feeding wire through a junction box to feed a 120-volt circuit near a 480-volt bus duct. The bus duct suddenly combusted, and the employee suffered burns to his left hand and upper body. He was hospitalized.
An employee was operating a brake press and making the final bend on a steel part. Her right middle finger got caught between the part and the top punch as it bent the part upward. The employee sustained a crush injury resulting in amputation of the fingertip.
An employee was feeding scrap metal into a chipper when his right hand was squeezed against a metal component of the machine. He suffered an amputation to the right index finger at the second joint.
On June 18, 2025, an employee working as a millwork installer was cutting shims using a circular saw. The saw hit a knot in the wood and jumped, cutting the palm of the employee's left hand and causing partial amputations to three fingers. The employee was hospitalized.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.