OGEMA, WISCONSIN—
Badger Precision Cut Stock, Inc.
Struck by dislodged flying object, particle · Other traumatic injuries and disorders, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Badger Precision Cut Stock, Inc. , W 4995 BJORKLUND RD, OGEMA, WISCONSIN 54459 on — Other traumatic injuries and disorders, unspecified, affecting the abdomen, except internal location of diseases or disorders.
Final narrative
On April 5, 2019, an employee was feeding the edger machine when a board jammed. After clearing the jam, the employee proceeded to operate the machine when a board kicked back and struck the employee in the abdomen. The injury required surgery.
More severe injuries at Badger Precision Cut Stock, Inc.
OGEMA, WISCONSIN—
Badger Precision Cut Stock, Inc.
An employee was at a log deck area when a log got hung up on the deck. When the log was lifted and placed down on the deck, the employee's right index finger was caught between it and a piece of support metal. The employee suffered a crushed finger and an amputation of the fingertip.
OGEMA, WISCONSIN—
Badger Precision Cut Stock, Inc.
On June 6, 2018, at approximately 10:00 a.m. an employee's left hand fingers were pinched between the table and the guard of a an up-cut saw, when the saw unexpectedly cycled, resulting in surgical amputation of the fingertips.
View Badger Precision Cut Stock, Inc. 's full OSHA safety record →
Similar incidents · Same event type
CROSS LANES, WEST VIRGINIA—
Lowe's Home Improvement
An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.
MOBILE, ALABAMA—
S & J Construction, LLC
An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.
KANSAS CITY, KANSAS—
RMVK Enterprise, INC.
A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.
FORT WORTH, TEXAS—
Dustrol Inc.
On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.
CARLYLE, ILLINOIS—
WalMart #436
An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.
More severe injuries in this industry (NAICS 321920)
AUSTIN, TEXAS—
Pallet Bros. ATX, LLC
An employee was cutting wood with a miter saw when their clothing was pulled into the blade, resulting in a bicep laceration. The employee was hospitalized. The blade cover was not in place at the time of the incident.
SAINT ALBANS, MAINE—
GERRITY INDUSTRIES
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.
COLUMBUS, OHIO—
Kamps, Inc
An employee was operating a bubble wrap production line. He was splicing the ends of the film rolls together with tape when a driven roll contacted his hand. His hand and arm were pulled into the machine up to his shoulder. The employee's forearm contacted the the hot surface (230-500 F) of the bubble stamping cylinder. He was hospitalized with burns to the forearm that required surgery and crushing injuries to the hand and forearm without fractures.
YOUNGSTOWN, OHIO—
Iron City Wood Products, Inc.
An employee was operating a pallet dismantling saw. A board became stuck, and the employee tried to pull the pallet. When the board broke, the employee's right hand made contact with the blade, resulting in the amputation of the right middle finger above the second knuckle.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.