Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at TESSY PLASTICS CORPORATION, 488 State Route 5 West, ELBRIDGE, NEW YORK 13060
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was attempting to clear parts from a belt when his left index finger was caught in the chain and sprocket, resulting in a finger amputation.
An employee was blowing out material in the blow-out booth when the silo magnet came down on his left hand, amputating the index and middle fingertips.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was blowing out material in the blow-out booth when the silo magnet came down on his left hand, amputating the index and middle fingertips.
At the maintenance shop, an employee was drilling plastic parts using a drill press. The employee's left glove got caught in the drill, and half of her left ring finger and her left little fingertip were amputated.
A maintenance technician was servicing an extruder and removed the cam locking pin on a hot water/steam line to change a water hose. Hot water/steam sprayed out, striking the employee on the right forearm and the right side of their neck. The employee sustained burns to their neck, right forearm, and right leg.
An employee was entering an area while carrying a tray containing 20 pounds of product. A plastic curtain came into contact with the employee's shoulder; the employee suffered a herniated disc while dislodging the curtain.
An employee was working on a cutting line that utilized a machine to pull material through the line. The employee was turning a roller to feed material into the machine when their left hand was caught between the rollers, resulting in abrasions and a dislocated thumb. The employee was hospitalized and required surgery on the thumb.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.