Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Saint Jean Industries, 424 Industrial Park Road, HEBER SPRINGS, ARKANSAS 72543
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was working inside a robotic cell, handling parts coming out of an X-ray machine. While waiting for the next tray of parts to come out of the X-ray, he rested his hand on the side edge of the roller system. The chain/sprocket teeth then caught his right glove, pulling his fingers into the sprocket. He pulled his right hand out of the sprocket gear and injured the tip of his right middle finger, resulting in a fingertip amputation. The chain and sprocket were unguarded at the time of the incident.
AmputationFingertip(s)Special process machinery, n.e.c.
On May 26, 2023, at 7:00 AM, two employees were finishing a shift when they had an altercation. The injured employee was slammed to the ground and sustained head trauma that required hospitalization.
After loading and unloading parts off an inspection conveyor system, an employee switched to inspecting parts in a black light room. He began to feel unwell and lost consciousness, falling backwards and striking his head on the concrete floor. He sustained severe head trauma and was hospitalized with a brain bleed.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 336330)
An employee was using a forklift to dump metal into a furnace. The furnace exploded, causing burns to multiple parts of the employee's body. The employee was hospitalized.
An employee was preparing to bend a steel tube by loading it into a computer numerical control (CNC) bender's clamping jaws. Her right middle fingertip was caught in the clamping saws, resulting in an amputation.
An employee was running a coil into the die when his hand slipped and contacted the cut-off hole of the die. The employee sustained a partial traumatic transphalangeal amputation of the left middle finger.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.