RIVER FALLS, WISCONSIN—
Best Maid Cookie Company
Caught in running equipment or machinery, unspecified · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at Best Maid Cookie Company, 1147 BENSON ST., RIVER FALLS, WISCONSIN 54022 on — Crushing injuries, affecting the hand(s), unspecified.
Watch Best Maid Cookie Company — free
Get an email when a new federal OSHA severe-injury report for Best Maid Cookie Company is published. One employer, no account, unsubscribe in one click.
Final narrative
On July 25, 2019, at about 9:45 p.m., an employee was checking a machine to ensure the line was clean and all food was removed when the employee's right hand became stuck and was crushed in a 3/4-inch gap between the two augers.
Similar incidents · Same event type
CULLODEN, WEST VIRGINIA—
Service Wire Company
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
OMAHA, NEBRASKA—
Oriental Trading Company, Inc.
An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.
MCALLEN, TEXAS—
Fox Packaging
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
SALTILLO, MISSISSIPPI—
Ashley Furniture Industries, Inc.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
BEDFORD HEIGHTS, OHIO—
ITW Bedford Wire
An employee's right hand was caught in a wire drawing machine, resulting in amputation.
More severe injuries in this industry (NAICS 311821)
YORK, PENNSYLVANIA—
Meiji America, Inc.
An employee was using an air hose to blow built-up dough off the rollers under the cutting apron on a conveyor belt line. The air stopped working and they went to manually remove the dough when their right hand was pulled into the pinch point between the apron and roller. The employee was hospitalized with a fracture to their right forearm that required surgery.
KANSAS CITY, KANSAS—
KEEBLER COMPANY INC.
An employee was conducting maintenance work on an stainless steel auger feeder (flexible screw conveyor) in the seasoning room. The lower end of the feeder came loose from the hopper. The employee lifted the auger to position it when the auger feed initiated and energized the auger. His hands were pulled into the auger, resulting in hospitalization with a partial amputation of the right thumb.
WENONA, ILLINOIS—
Hearthside Food Solutions, LLC
An employee was walking down a flight of stairs from a catwalk to a production area. The employee missed a step, fell down the stairs, and suffered broken ribs.
ISLIP, NEW YORK—
Cookies United LLC
An employee was troubleshooting a packaging machine. While adjusting the air pressure of the machine, the forming head triggered and the lever struck his left index finger. The finger was cut and the fingertip was amputated.
YORK, PENNSYLVANIA—
Meiji America, Inc.
An employee was retrieving a pen that fell under a cross conveyor when her right arm became entrapped between the conveyor belt and the underside drive roller. Her forearm was fractured.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.