Caught in running equipment or machinery during regular operation · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Mack Trucks, Incorporated, 2800 Commerce Drive, MIDDLETOWN, PENNSYLVANIA 17057
on — Cuts, lacerations, affecting the forearm(s).
Final narrative
An employee was retrieving a fallen part from a shot blast machine. The employee's lower left arm was pinched and lacerated between the rotating internal bed and the machinery wall.
An employee was retrieving a tool from a wheeled toolbox when the toolbox fell onto the employee, resulting in a lower back vertebra fracture and an injury to the lower leg and foot.
An employee was backing up a forklift. As it turned, his right upper arm was pinched between it and a material storage rack. He suffered a deep tissue avulsion above the elbow.
An employee was maneuvering and positioning a vehicle hood assembly on a dolly. The assembly fell and a hood struck the employee's right arm, breaking it.
An employee was working near an assembly line when a vehicle struck a wheel hub that subsequently struck the employee, resulting in a puncture on their right calf.
An employee bent down to install fuel tank straps on the left side of a truck and hit their forehead on the chassis frame. The employee sustained a head laceration.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333618)
An employee was moving a hoist to the end of a bridge rail to create space for another hoist on the same rail. The hoist being moved, along with its supporting beam, detached from the bridge rail and fell, striking the employee in the head. He suffered a contusion and laceration to the head and was hospitalized.
An employee was operating a machine. When they performed a motion to push a machined engine block away from their body, they experienced a back strain, resulting in hospitalization.
On September 13, 2025, an employee had been working at an outdoor event. At the end the day, she was walking around outside the facility to make sure everything was put away and felt overheated. The employee was hospitalized for heat-related illness.
An employee was installing insulation in a wall panel when the panel fell on top of them, resulting in leg and back injuries that required hospitalization.
An employee put a cylinder machining pallet into manual mode to unjam it. After completing the task, their left hand became lodged between a pulley and belt, resulting in the amputation of three fingers.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.