Caught in running equipment or machinery during maintenance, cleaning · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at Schlotterbeck & Foss, 3 Ledgeview Drive, WESTBROOK, MAINE 04092
on — Soreness, pain, hurt-nonspecified injury, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee heard a noise in a machine he was working on. He made a repair and had another employee turn the machine back on. His hand was inside the machine and his right index finger was caught and severely damaged in a mechanism in the panel. He was hospitalized and had surgery. The machine was unguarded at the time of the incident.
An employee was lifting a drum from a pallet when the employee's left middle finger was caught between the drum and pallet, resulting in a fingertip amputation.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311941)
A production maintenance technician's right index fingertip was severed after contacting the valve of a filler machine on a production line. His right index finger was partially amputated below the nail.
On August 14, 2025, an employee was priming a pump that was failing to pump mustard. The employee took a water hose and started water into the pump. The employee's finger slipped off the nozzle of the hose and came into contact with the pump's impellers, causing the employee to suffer an amputation to the right index finger at the first knuckle.
An employee was cleaning packets from a box shaker when the shaker crushed his left middle finger. The employee sustained partial amputation of the finger through the phalanx.
An employee was cleaning inside a machine using a rag. The rag was caught in a sprocket and their hand was pulled into the machine, resulting in the amputation of two fingers.
An employee was shrink wrapping product on the hand shrink wrapper. As the employee went to tear the shrink wrap, his finger struck a sharp edge on the conveyor stand. The employee's fingertip was amputated.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.