PMI, LLC

An employee was operating a press when the feeder jammed and the product did not advance. The feeder cycled, partially amputating the employee's right thumb.

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was working to remove scrap from the vicinity of a scrap shaker tray located at the rear of a press when she suffered a laceration and partial amputation of her right index finger.

An employee was loading a die plate onto a rack when the plate tipped down and pinched his finger, lacerating it. The employee sustained an amputation.

An employee was placing a flattener die on a turret press. The die broke loose and fell into the turret. The employee's right hand was pinched between the turret and the die, resulting in a partial amputation of the little finger.

An employee was un-banding metal blanks from pallets. He stepped on a pallet where the boards of the pallet overhung the runners, causing him to lose his footing and fall to the floor. The employee sustained injury to his left hip requiring hospitalization.

An employee was clearing a jam in the spot welder when the machine activated and crushed their right thumb, resulting in amputation of the thumb tip.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.