Honeywell International

On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.

An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.

An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.

An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.

An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.

An employee was retooling a pipe bending machine while it was energized when the machine clamp function activated. Their left hand was caught as the machine's radius die closed on the clamp and it crushed his left ring finger, resulting in medical amputation to the second knuckle.

An employee was operating a hose/bender machine. He was reaching to adjust a piece of hose and got caught in a pinch point, sustaining an amputation to his finger.

On April 19, 2023, an employee was assembling a hose and performing a pull test. During the pull test, the employee's left index fingertip was amputated by the longitudinal pull tester.

On March 9, 2023, an employee was assembling manifolds. While pushing an end fitting into the hose of an automatic pushing machine, the employee suffered an amputation to the tip of the right index finger.

An employee was running a hone machining center and was walking around to the rear of the machine to evaluate a coolant pressure gauge. The employee tripped over a steel angle iron that was on the floor and sustained a fractured hip requiring hospitalization.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.