Carlisle Electric, Inc

An employee was power washing a metal tank from an elevated platform. They fell through a gap between the platform and the tank. The employee landed on the ground and sustained fractures to their ankles and feet.

An employee was installing a metal roof when he stepped on a skylight. The employee fell through the skylight to the ground, resulting in head and shoulder fractures.

An employee was replacing an HVAC unit in a residential home. While he was in the attic space above the garage, the wood he was walking on broke, causing the employee to fall through the sheetrock to the concrete floor below. The employee bumped his head and sustained a shoulder injury as well as a broken ankle.

An employee was putting a tarp on a water tank while standing on a trailer. She lost her footing and fell through the trailer bed, striking the corner of the trailer bed. The employee sustained internal bleeding.

An employee was repairing a sub-floor in a residential house that had water and fire damage. The employee fell through the sub-floor and landed in the basement, resulting in spinal fractures that required hospitalization.

An employee was removing product (a transformer radiator weighing approximately 2,640 pounds) from the paint room utilizing an overhead drop-crane system. The employee inspected the product in the drop section and started to lower the load. The product fell out of the rigging and hit the ground. It then tipped, pinning the employee against a desk. The employee was hospitalized with collapsed lungs, a dislocated sternum, a head injury requiring staples, and fractures to their ribs and wrists/lower arms.

An employee was retrieving an empty blue bin. When he turned around, he tripped over a skid and fell to the floor, striking his head and sustaining injuries to his hip and foot. The employee was hospitalized with a fractured left hip.

An employee was buffing a part on a buffing machine when their glove was caught by the rotating spindle, resulting in lacerations to their arm.

An employee was troubleshooting a cutter machine to see why the blade was not spinning. The power button on the machine was pressed and the blade contacted his right little finger, resulting in a laceration and an amputation. The machine was energized at the time of the incident.

An employee was operating a horizontal press. As the employee reached for their work badge, the press cycled onto their little finger and amputated a quarter-inch of the tip.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.