CAMBRIA, WISCONSIN—
Didion Milling
Fall through surface or existing opening, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Didion Milling, 501 S Williams Street, CAMBRIA, WISCONSIN 53923 on — Fractures, affecting the multiple body parts, n.e.c..
Final narrative
On February 29, 2020, an employee was on an elevated platform to perform routine cleaning activities and fell through an open access hatch in the floor of the platform. The employee fell onto a metal grate and sustained fractures to both arms and a rib requiring hospitalization.
Similar incidents · Same event type
WOLFFORTH, TEXAS—
Scott Manufacturing, Inc.
An employee was power washing a metal tank from an elevated platform. They fell through a gap between the platform and the tank. The employee landed on the ground and sustained fractures to their ankles and feet.
NAPLES, FLORIDA—
Tamiami Builders Inc.
An employee was installing a metal roof when he stepped on a skylight. The employee fell through the skylight to the ground, resulting in head and shoulder fractures.
JACKSONVILLE, FLORIDA—
Air Source America, LLC
An employee was replacing an HVAC unit in a residential home. While he was in the attic space above the garage, the wood he was walking on broke, causing the employee to fall through the sheetrock to the concrete floor below. The employee bumped his head and sustained a shoulder injury as well as a broken ankle.
MIRAMAR BEACH, FLORIDA—
Russell Landscape Partners, LLC
An employee was putting a tarp on a water tank while standing on a trailer. She lost her footing and fell through the trailer bed, striking the corner of the trailer bed. The employee sustained internal bleeding.
DENVER, COLORADO—
BELFOR Property Restoration
An employee was repairing a sub-floor in a residential house that had water and fire damage. The employee fell through the sub-floor and landed in the basement, resulting in spinal fractures that required hospitalization.
More severe injuries in this industry (NAICS 311221)
BLAIR, NEBRASKA—
Cargill Inc.
An employee was bringing a filter online. When the employee opened a valve to initiate flow through the filter, the gasket on the filter housing failed, spraying a water/erythritol mixture (heated to about 175 degrees Fahrenheit) toward the employee. The employee moved back quickly and their chemical suit caught on something, causing it to open. The mixture burned the employee's abdomen and left arm.
DAYTON, OHIO—
Cargill, Incorporated
An employee was performing regular job duties when they began to feel unwell. The employee was hospitalized for dehydration due to heat.
DAYTON, OHIO—
Cargill, Incorporated
An employee was descending a ladder and fell approximately 5-6 feet to the floor, resulting in a fractured elbow.
DAYTON, OHIO—
Cargill Incorporated
An employee was unloading material from a rail car when they fell approximately 15 feet onto the feed layout area. The employee was hospitalized with a broken femur that required surgery.
CENTER, TEXAS—
Western Grain and Milling
An employee was removing feed from a grain trailer. After unclogging feed in the cone of the feed silo, the employee was getting up off the ground. His right hand was braced on the concrete and as he raised his body, the right hand slipped. His left index finger was caught in the auger, resulting in amputation.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.