Struck by dislodged flying object, particle · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Alamon Inc, Howland Road, CLIFTON SPRINGS, NEW YORK 14432
on — Fractures, affecting the jaw, chin.
Watch Alamon Inc — freeGet an email when a new federal OSHA severe-injury report for Alamon Inc is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was drilling a hole on a pole during an inspection. When the employee pulled the drill out of the hole, the bit came off the drill and struck the employee on the face, resulting in a fractured jaw.
An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.
An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.
A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.
On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.
An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.
More severe injuries in this industry (NAICS 321114)
An employee was working from a step ladder and putting grease in a fitting on a cylinder door. His leg was caught between two of the ladder's rungs and the ladder folded up. He fell and broke his leg.
On June 10, 2024, an employee was grinding mulch in a tub grinder. A front end loader was unloading mulch into the tub grinder and ran over his ankle, breaking it and also causing a hairline fracture to his pelvis. He was hospitalized, requiring surgery.
On January 17, 2024, an employee was working on a roller machine when a piece of metal lacerated their right forearm, causing tendon injury. The employee was hospitalized and underwent surgery.
An employee had been warming his hands at a stationary heater near the stacker operator. He was by the rear passenger-side of his parked forklift when another forklift reversed and struck him. His left leg was pinned between the two forklifts and he sustained a fractured fibula.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.