105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

I-K-I Manufacturing Co., Inc.

Contact with hot objects or substances · Heat (thermal) burns, unspecified

Federal OSHA recorded a severe workplace injury at I-K-I Manufacturing Co., Inc., 411 Ridge Street, STOUGHTON, WISCONSIN 53589 on — Heat (thermal) burns, unspecified, affecting the trunk, unspecified.

An employee was removing a pump for a hot water heater when hot water burned his torso.

Hospitalized Trunk, unspecified Water

I-K-I Manufacturing Co., Inc.

Two employees were unjamming a machine. One employee was manually moving the rotary part of the machine while the injured employee was clearing the jam. The injured employee's right index finger was caught in a pinch point, resulting in a partial amputation.

View I-K-I Manufacturing Co., Inc.'s full OSHA safety record →

OQ Chemicals

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

Husbe Zoaq

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

The Cumberland Rest Inc. dba Trinity Terrace

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

Mueller & Wilson Inc

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

Oklahoma Steel & Wire Co., LLC

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

American Industrial Services

An employee's left bicep was lacerated by high-pressure water during water blasting operations. The employee was hospitalized.

New England Traffic Control Services, Inc.

An employee was performing flagging operations on a closed road. A postal vehicle was allowed onto the road to make a delivery. The employee was struck by the postal vehicle as it was backing up, resulting in a broken leg.

USIC Locating Services, LLC

An employee was walking and taking post-locate photos. He stepped on a ceramic drainage tile and his foot/leg punched through the tile. His leg was lacerated by the broken tile. The employee was hospitalized with internal bleeding due to a punctured femoral artery.

WG Yates Heavy Division*

Employees were preparing to place a section of metal grating measuring approximately 50" x 18" and weighing 40 to 50 lbs. The injured employee grabbed the grating to pull it toward himself and another employee was moving to the other side to assist with the lift. As the injured employee pulled, his right foot slipped and twisted. He was hospitalized with a fractured right leg.

Flagger Force

An employee was in their personal vehicle awaiting instructions from the construction contractor on posting traffic cones. The driver of a motor vehicle swerved to avoid a steel plate in the roadway and struck the employee's car. The employee was hospitalized with four fractured ribs.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.