Fall on same level due to tripping over an object · Traumatic injuries to spinal cord, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Purcell Tire & Rubber Company, 11501 Mabelvale West Road, MABELVALE, ARKANSAS 72103
on — Traumatic injuries to spinal cord, unspecified, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee was rotating tires on a customer's vehicle. While carrying the tires from the rear to the front of the vehicle, the employee tripped over an air hose and fell. The employee's head struck a four-post lift, and the employee suffered a spine injury.
HospitalizedBack, including spine, spinal cord, unspecifiedFloor, n.e.c.
An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.
An employee was replacing a tire on a wheelbarrow when the tire exploded. The employee sustained fractures to his right hand and an abrasion to the right side of his face. The employee was hospitalized and required surgery on his right hand.
An employee was guiding a customer's automobile onto the alignment rack when the vehicle drove over the rack and pinned the employee against the alignment computer. The employee sustained a bruised left hand and a fractured left fibula and was hospitalized.
An employee was working on a cushion ring (steel). As they lifted the cushion ring with both hands to flip it up, the ring slid down and the employee's right middle fingertip was crushed between the ring and the work table. The employee was hospitalized with a fracture, and their right middle fingertip was amputated.
An employee was returning to their truck after collecting a check for a delivery of tires. As they were shutting the door on the back of their box truck they were struck by an electric all-terrain vehicle that was being serviced, resulting in a fractured left ankle, fractured elbow with bone through the skin, and fractured pelvis.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.