Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at DuBois Chemicals, Inc., 476 Clay St., CHILTON, WISCONSIN 53014
on — Amputations, affecting the fingertip(s).
Final narrative
Two employees were attempting to dislodge two steel carts that had become entangled when a cart shifted on its base, coming into contact with the injured employee's right pinky finger. As a result, the employee's right pinky fingertip was amputated.
AmputationFingertip(s)Cart, dolly, hand truck-nonpowered
An employee was emptying ashes from a dump box when his left ring finger was caught between the handle and the ash box, resulting in a partial fingertip amputation.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 238320)
An employee was on a 12-foot extension ladder while painting the wall and soffit area of a pavilion less than 6 feet off the ground. The employee was using a sprayer when he fell off ladder and landed on his arm on the dirt clay ground. The employee sustained a dislocated elbow and fractures to his right arm and wrist that included an open fracture. The employee was hospitalized and required surgery.
An employee was blasting a water tower. They fell approximately 60 feet off a suspended scaffold and sustained broken vertebrae, a compound fracture of the tibia, a fractured heel, and a rupture to their liver. The employee was hospitalized.
An employee was sandblasting paint from a water tower when the blasting media sprayed across their forearm, resulting in an elbow injury that required hospitalization.
An employee was working from a boom lift, painting wood trim at a second-story roof level. The lift drove over an unmarked dry well, tipped, and catapulted the employee to the ground. The employee sustained fractures to their heels and vertebrae. Fall protection was not being worn at the time of the incident.
On October 2, 2025, an employee was ascending a ladder attached to a scaffold structure approximately 10 feet high. While climbing up, he lost his grip on a rung and fell to the ground, landing on his shoulder. He was hospitalized with fractures to his collarbone and shoulder.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.