Other fall to lower level more than 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Rio Verde Framing LLC, 6200 Watkins Avenue, SPRINGDALE, ARKANSAS 72764
on — Fractures, affecting the multiple trunk locations.
Watch Rio Verde Framing LLC — freeGet an email when a new federal OSHA severe-injury report for Rio Verde Framing LLC is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee had been conducting framing work. The employee was laying plywood to a window opening and was leaning against the guardrail. The guardrail gave way and he fell from the third floor. He struck a beam on the second floor and landed between two concrete platforms in the grass. The employee sustained multiple injuries including a compressed fracture with retropulsion at the L2 vertebra, a pelvic fracture, and a non-displaced sacral alar fracture.
HospitalizedMultiple trunk locationsStructures and surfaces, unspecified
An employee was installing exterior handrails on the fourth floor of a multi-family residential building under construction when the employee fell approximately 40 feet to the ground. The employee was hospitalized with leg and back injuries.
An employee was performing an inspection of the seed warehouse when they fell 30 feet from a catwalk to the ground. The employee sustained facial injuries and a compound fracture to the left femur.
An employee was on a cherry picker approximately 30 feet high, selecting boxes of merchandise from warehouse racking to place onto a pallet. The employee fell and sustained neck and back injuries.
On November 6, 2023, an employee was installing roofing materials on a multi-residential construction site 35 feet above ground level. The anchor on the employee's personal fall arrest system became unattached and the employee fell to the ground. They sustained multiple fractures.
On October 12, 2023, an employee was stacking insulation on a roof when they fell 35 feet through a skylight to the concrete floor below. The employee sustained an ankle and pelvis fracture.
On the fifth or sixth floor deck, an employee was supervising iron workers who were measuring to place rebar. The employee was struck by a wooden tool box that was being lifted by a tower crane. The employee then struck a wooden fence and fell approximately 50 feet to the ground. The employee sustained fractures to both legs and lacerations.
More severe injuries in this industry (NAICS 238130)
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was on a 6-foot ladder, working to nail a 2-by-4 on a hotel carport ceiling. He lost his balance and his muddy boots slipped. He then fell and his foot lodged in the ladder. His foot was broken in two places and he was hospitalized.
An employee was installing a ceiling joist for a residential home when they fell from a framing structure and landed on the ground 8 feet below. The employee's right arm was fractured.
On September 16, 2025, a employee was moving a dolly with seven drywall sheets. The wheel of the dolly got stuck. The material tipped over and fell onto the employee's left foot, fracturing their tibia.
An employee was installing 80-foot-long trusses onto a 150-foot by 80-foot post-frame building. The employee worked from the north lift and then on the trusses about 20 feet up to install bracing. While installing diagonal bracing on the top chord, the trusses collapsed, causing the employee to fall approximately 20 feet to the concrete and be struck by the falling trusses. The employee was hospitalized with a fractured pelvis and a concussion.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.