Sharp Corporation

An employee was entering a locker room when she was hit by the door as another employee was exiting the locker room. She suffered a contusion to her face near the right eye.

An employee was manually moving a belt on an HVAC unit when three of the employee's fingers were pinched and amputated between the belt and pulley.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

An employee was walking behind the rewind coding machine while on his phone. He rested his left wrist on top of the slitter bar and his finger came in contact with the roller, resulting in amputation.

The injured employee was assisting the bander operator with dressing units with dunnage. A unit became stuck on the conveyor. The injured employee was pushing the unit on the conveyor when a conveyor roller pulled his shoe in-between the rollers. The employee sustained crushing injuries to their left foot/toes.

An employee was inspecting and adjusting a tray in a thermoforming machine when the the trigger switch was touched, causing the machine door to close on their right hand. The employee sustained crushing injuries to the hand.

An employee was adjusting the tracking of a conveyor belt when their left hand/arm were pulled into the conveyor. The employee sustained fractures.

An employee was working to retrieve debris from a powered conveyor when the rollers contacted his right thumb, resulting in a laceration.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.