Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at MINZNER & COMPANY, 2100 LIBERTY STREET, EASTON, PENNSYLVANIA 18042
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
On October 16, 2020, an employee was operating a joiner machine to flatten and straighten a board when his hand contacted the blade resulting in amputation of two fingers.
HospitalizedAmputationFinger(s), fingernail(s), n.e.c.Metal, woodworking, and special material machinery, n.e.c.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.
An employee was climbing a 10 foot ladder to reach the top of a warehouse rack. He stepped off the ladder onto the racking, slipped, and fell to the concrete floor, hitting the ladder on the way down. He suffered a broken pelvis.
An employee was walking into the store to clock in when she tripped and fell on the floor. The employee sustained a fracture of her proximal right tibia.
An employee was loading merchandise into a truck when their right foot stepped on a 4-way dolly, causing them to lose balance and fall to the ground, hitting their chin on the sideboard. The employee was hospitalized for injury to their spine.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.