Caught in running equipment or machinery during maintenance, cleaning · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Stanley Black & Decker, Inc, 11 Grammes Rd, ALLENTOWN, PENNSYLVANIA 18103
on — Cuts, lacerations, affecting the upper arm(s).
Final narrative
A machine operator was troubleshooting a mechanical press machine. The machine severely lacerated his upper right arm and he was hospitalized. The machine's light curtain was not working at the time.
An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.
At about 9:00 a.m. on March 10, 2025, an employee was operating a lathe when a part jammed inside it. The employee was removing the jammed part when the machine's slide shifted, causing the lathe spindle to amputate his left ring fingertip.
A temporary employee was using a forklift to move a pallet of goods when the forklift struck a rack. The employee's little finger was caught between the forklift and the rack and was amputated.
An employee was walking toward a hammer forge machine area. He slipped on the slippery floor and fell onto the forge. The forge's dies caught his right hand and crushed three fingers, amputating them.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332999)
An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
Two employees were running a CNC folder machine. The injured employee went to adjust the metal and the machine came down, crushing her forearms. Her left arm was fractured and both arms required stitches.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.