Pellerin Milnor Corporation

An employee was showing a second employee how to install a drive shaft onto a rotor plate. The drive shaft had to be aligned and seated onto the rotor plate by using a leather mallet and striking the drive shaft repeatedly. While attempting to stabilize the drive shaft, the second employee placed his index finger on the end of the shaft. The first employee struck the second employee's finger against the drive shaft with the leather mallet, crushing his left index finger, which had to be surgically amputated.

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was changing a copper ring on a press welder. The machine was actuated, and the employee's left thumb was pinched between its ring and its nipple. The thumb tip was amputated between the nail and the first knuckle.

An employee was unjamming a lift when their right leg was caught between a pneumatic ram and the frame assembly of the lift. The employee's leg was fractured.

An employee was delivering laundry at a vendor's loading dock. He went inside the delivery trailer to load empty bins and tripped on the trailer floor and fell inside the trailer. The surface inside the trailer was approximately 2 inches higher than the loading dock surface. The employee was hospitalized with a fractured hip.

An employee tore a muscle in his abdomen while unloading soiled linen carts.

An employee was mounting a forklift when they slipped off the forklift resulting in strained muscles in the abdominal area. The employee had ice on their shoe at the time.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.

A security employee was holstering her firearm when the gun discharged a bullet into her right leg. The employee was hospitalized.

A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.