Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Buffalo Wire Works, 1165 Clinton Street, BUFFALO, NEW YORK 14206
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was reassembling the screen support roller onto a pillow block. He connected the left side to the pillow block and then went to ensure that the right side of the pillow block was still connected. While doing so, the left side of the roller fell back out, pinching his finger between the roller and the support angle bracket and causing a laceration to the ring finger.
HospitalizedFinger(s), fingernail(s), unspecifiedMetal, woodworking, and special material machinery, unspecified
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 332618)
An employee was driving a powered industrial truck (PIT) carrying a nesting sheave on the back counterweight of the PIT. He was holding the sheave when the PIT struck a pothole in the floor, causing the sheave to roll forward and crush his right index fingertip against the back of the PIT seat frame. The employee's fingertip was amputated, requiring hospitalization and surgery.
An employee was building slings. They were placing wire rope in a pneumatic vise when their right index finger was caught between the vise and the wire rope, resulting in a fracture that required hospitalization and surgery.
At about 7:15 a.m. on August 28, 2025, an employee was using a construction compactor to stabilize the dirt of a dam that had just been built. The dirt gave way underneath the compactor, which tipped on its left side. The employee fell out and was crushed and pinned between the compactor and the dirt. He was hospitalized, having suffered a broken sternum and broken ribs on both sides, as well as a laceration to the left leg by the ankle joint.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.