Nonroadway collision with other vehicle, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Von Roll USA Inc., 200 Von Roll Drive, SCHENECTADY, NEW YORK 12306
on — Fractures, affecting the lower leg(s).
Final narrative
An employee was driving a reach truck in a shipping warehouse. The truck struck a forklift as it was lowering its forks, and the forks entered the truck's operator compartment and broke the employee's lower leg.
HospitalizedLower leg(s)Forklift, order picker, platform truck-powered
An employee was attempting to remove a core from a shaft. The shaft was being held on its end, and the employee had placed his hand on the floor under the shaft when a coworker hit it to remove the core. The employee's fingertip was underneath at the time and was amputated.
While an employee was operating a machine to cut a circular test sample, a pin in the machine broke and made contact with the employee's right index finger, amputating the fingertip.
An employee was driving a forklift when it collided with another forklift. The employee's middle finger was pinched between the two forklifts and partially amputated.
A temporary employee was operating a powered industrial truck and attempting to maneuver around another automated powered industrial truck when the vehicles collided. The employee sustained a crush injury to their right foot.
An employee was operating a double pallet jack down an aisle when he was struck by another double pallet jack. The employee's right lower leg was then caught between the pallet jack and a rack beam, resulting in an injury just above the right ankle that required hospitalization.
An employee was operating a ride-on double pallet jack when he was struck from behind by another pallet jack. Their lower right leg was caught resulting in fractures to the tibia and fibula.
More severe injuries in this industry (NAICS 325998)
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.
An employee was removing a hose from a chemical tank after filling the tank with hexamethylenediamine (HMD). He checked the line to ensure that the hose was clear, then disconnected the hose at the connection. Residual chemical sprayed onto his face, causing a second-degree burn. He was hospitalized.
Two employees were moving a railcar (plastic pellet hopper car) using a mobile railcar mover. One employee was the engineer in control of the railcar mover and the injured employee was a switchman. The railcar mover went forward and the hopper railcar struck the injured employee, resulting in a severe crushing injury to the employee's right arm.
An employee was opening a filter housing in the potassium chloride production area and got sprayed with a hot solution of potassium chloride brine. The employee sustained thermal burns to their right hand and legs.
An employee was performing maintenance on a guillotine cutter machine. As the employee was placing a pin in the machine, his left middle fingertip was caught, resulting in a partial amputation to the finger. The machine was not locked out at the time.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.