Fall on same level due to tripping on uneven surface · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Standard Materials Group, Inc., Hwy. OK-72, HASKELL, OKLAHOMA 74436
on — Fractures, affecting the thigh(s).
Final narrative
An employee was setting up his truck on asphalt hard top with a gravel shoulder at approximately a 10 percent grade and with approximately a 1-inch lip. The employee was walking on the gravel shoulder and transitioning to the asphalt surface when he tripped on the lip and fell, landing on his right hip and resulting in a fracture of the right femur.
HospitalizedThigh(s)Ground irregularity
More severe injuries at Standard Materials Group, Inc.
An employee was backing a concrete delivery truck down a temporary road when a portion of the road collapsed. This caused the truck to roll into a drainage ditch; the employee sustained three left rib fractures and soft tissue damage.
An employee was walking to a customer's door to deliver a package when they tripped on uneven pavement and fell to the ground. The employee sustained a hip fracture.
An employee was walking on the sidewalk toward the front entrance of the building to start her work shift. She tripped over uneven pavement and fell onto the concrete sidewalk. The employee was hospitalized with a fractured left hip and a sprained left knee.
An employee was leaving for lunch. The wheel of her knee scooter struck a divot in the floor which caused her to fall into a metal rack. The employee sustained a broken right shoulder.
More severe injuries in this industry (NAICS 327320)
An employee was walking through the garage and stepped on a mechanic's creeper. His feet went out from under him and he fell, sustaining a fractured right femur.
An employee was exiting a loader and coming down the ladder. His hand slipped off the railing and he fell backward onto sandy ground, landing on his side. The employee was hospitalized with a fractured pelvis and a rotator cuff tear.
A concrete mixer truck driver was walking up the stairs of the slump rack. They fell from the slump rack platform and landed on the ground in the wash-out area. The employee sustained fractures to their left scapula and lower back vertebrae.
An employee backed their concrete truck into place to begin unloading it into a concrete pump unit. He exited the vehicle, and went to the rear to unload. When he began unloading, the truck rolled backward and pinned him against the pump unit. The employee sustained fractures to their pelvis, both femurs, both tibias and fibulas, and their left ankle.
A mechanic was changing out an air spring on a concrete mixer truck cab. The air spring was receiving higher air pressure than it was designed to use, because of a faulty level check valve. This increased pressure caused the air spring to burst. Its top portion separated and struck the employee's left forearm, causing a laceration and fracture. The employee was hospitalized, requiring surgery.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.