Exposure through intact skin, eyes, or other exposed tissue · Chemical burns and corrosions, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Inhance Technologies, Inc., 29 Royal Drive, FOREST PARK, GEORGIA 30297
on — Chemical burns and corrosions, unspecified, affecting the multiple face locations.
Final narrative
The employee was disconnecting old equipment and installing new equipment when he was exposed to hydrogen fluoride. He suffered chemical burns to the left arm and light burns to his left cheek and eye.
HospitalizedMultiple face locationsHydrogen fluoride, hydrofluoric acid
On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.
An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.
An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.
An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.
An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.
More severe injuries in this industry (NAICS 326160)
An employee was watching as a technician worked with a machine. The machine's parts were manually moved while the employee's hand was inside the machine, and his fingertip was amputated. The incident took place during a training activity.
On October 14, 2025, an employee was on a step platform showing another employee the support bracket for a blow pin assembly on a blow molding machine that needed repaired. The blow pin assembly came up and pinched the injured employee's right middle finger, resulting in a broken finger and a laceration to the top of the hand.
On August 22, 2025, an employee was helping to move a 700-pound compressor cylinder cap head into position to slide down the bolt holes onto the bottom half of the cylinder. When a bolt hole aligned, his left index fingertip was caught in it. The cap came down and amputated the fingertip.
A maintenance employee was working on a conveyor when his thumb was caught in the chain/sprocket area causing an amputation to the thumb tip. The machine was running at the time of the incident.
On March 20, 2025, at approximately 11:02 AM, an employee was shrink wrapping a pallet when he lost his balance and fell to ground. The employee sustained a hip and leg injury that required hospitalization and surgery.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.