Parallel33 Lumber Corp.

An employee was trying to remove a jammed board. A running belt caught the employee's left middle finger against a plastic slide. The finger was lacerated, resulting in a fingertip amputation.

An employee suffered a fingertip amputation while removing a jammed board. The machine was guarded at the time.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee became overheated while working at a plywood production facility. The employee sustained dehydration, heat syncope, rhabdomyolysis, and an acute kidney injury.

An employee was standing on a platform, cleaning a mold, when he fell through an opening in the platform to the concrete floor approximately 6 feet below. The employee was hospitalized with injuries to his shoulder, elbow, and rib.

The injured employee was on the ground level receiving an OSB board from a co-worker who was on a 10-foot-high catwalk. The board was 4 feet by 25 feet and weighed approximately 270 pounds. As it was being slid down a handrail by a crew of three employees, the board went over the rail and landed on the injured employee's left foot, resulting in a fracture.

An employee was unloading wood trusses from a trailer when a few trusses fell and struck him. The employee sustained a hip fracture.

An employee was working on a wood lamination machine to form arches. As the employee was using a hammer, it struck his thumb, resulting in a fingertip amputation.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.