WAUNAKEE, WISCONSIN—
Octopi Brewing, LLC
Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury at Octopi Brewing, LLC, 1131 Uniek Drive, WAUNAKEE, WISCONSIN 53597 on — Second degree heat (thermal) burns, affecting the multiple body parts, n.e.c..
Final narrative
An employee was filling a stainless steel batching table with hot water to begin a CIP cycle. Once the equipment filled with hot water, the pressure caused a faulty valve to open. The employee was sprayed with hot water and suffered second-degree burns to his arm, torso, and leg.
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 312120)
BREINIGSVILLE, PENNSYLVANIA—
BOSTON BEER COMPANY
An employee was adjusting a conveyor belt with a tool. The belt broke, causing the tool to fly back and lacerate the employee's head.
HOUSTON, TEXAS—
Gulf Coast Distillers
An employee was carrying a bucket of acid to his workstation for cleaning purposes. He slipped and fell, and the acid spilled into his eyes. He suffered eye injuries and was hospitalized.
TRENTON, OHIO—
Molson Coors Beverage Company USA LLC
Two maintenance workers were troubleshooting an actuator. They removed the end covers to check for air leakage around the piston head. When they connected an air hose to the side of the actuator and applied pressure, the piston head blew out of its housing. It struck one of the employees in the chest, causing the employee to fall to the ground. The employee suffered an abdomen contusion, resulting in a laceration to the liver, and was hospitalized.
FLORENCE, ALABAMA—
Southern Brew Corp.
On March 25, 2025, an employee was closing the hurricane-rated sliding door and pinched her right index finger between the door and the doorframe, resulting in a fingertip amputation.
KANSAS CITY, MISSOURI—
Boulevard Brewing Company
An employee was troubleshooting a machine when he slipped and went to brace himself. His hand entered the machine and the blade contacted his finger, resulting in a fingertip amputation.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.