Vitro Architectural Glass Incorporated

An employee was using runners to move packs of glass from a truck when one pack fell off the runners and struck the employee's lower body and knocked him to the floor. The employee sustained five fractured ribs, internal injuries, and a lower leg laceration. The employee was hospitalized and required surgery.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

On August 16, 2025, at approximately 11:15 AM, an employee entered the "pack cell" at a glass fabrication line to unjam glass product from the "pop up". The employee was removing glass product when residual pneumatic energy completed cycling the "pop up". The employee's fingers became caught in the pinch point created between the "pop up" and the conveyor. The employee sustained lacerations and tendon damage to their left index, middle, and ring fingers.

On July 5, 2025, an employee was working to lubricate the chain on an autoclave machine in the coating factory. Their left index finger was caught in the machine resulting in surgical amputation at the first joint. The machine was guarded at the time, but was not locked out/tagged out.

An employee was walking through a facility after returning from break when a forklift ran over their left foot. The employee was hospitalized with fractures to their foot and ankle that required surgery.

An employee was greasing a furnace when their left index finger was caught in a gear and amputated.

On March 4, 2025, an employee was walking when they tripped over a rolled up work mat and fell to the floor. The employee sustained a fractured hip.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.