Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Peco Foods, Inc, 4114 US 67 South, POCAHONTAS, ARKANSAS 72455
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
At about 3:10 p.m. on July 28, 2021, an employee inserted a J-shaped hook tool into a leg processor to remove a chicken hind. The machine caught the hook and pulled the employee's hand toward the leg processor's guard. The employee's hand was pinched between the tool and the guard opening, causing an amputation of the little finger above the middle knuckle.
On March 24, 2025, an employee was clearing a backed-up drain. As he was removing one of two fiberglass grates from the clogged drain, the grate slipped and fell, causing his right index finger to be crushed between the two grates. His right distal index finger was fractured and lacerated.
An employee was draining hot oil from the fryer into the floor drain and went to close the valve when they slipped and fell to the floor. They fell into hot oil that overflowed from the drain, resulting in burns to 45% of their body.
An employee was cleaning a chicken neck skinning machine when they noticed chicken skin was stuck on a piece of the machinery. The employee removed the piece of excess skin and their left index finger got caught in the equipment, resulting in a fingertip amputation.
An employee was gravity feeding a chemical cleaner from a forklift into a fryer using a hose when the hose came disconnected. The chemical sprayed onto the employee, resulting in chemical burns to their neck, back, and pelvic area.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.
An employee was troubleshooting a thigh deboner on a poultry processing line. As he worked to dislodge a thigh bone caught in the blade mechanism, the machine amputated the first and second digits on his left hand. He was hospitalized.
On September 25, 2025, an employee was exiting a yard truck. They slipped and fell approximately 3 feet from the top tread of the steps to the concrete below. The employee sustained a fractured left hip.
An employee was operating a stand-up forklift, picking product for an order. The forklift struck a metal rack and the employee's left arm was caught between the forklift and the rack. He was hospitalized with a fracture to the neck of his radius and an open fracture to the olecranon (elbow).
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.