Other fall to lower level more than 30 feet · Paralysis, paraplegia, quadriplegia
At a glance
Federal OSHA recorded a severe workplace injury
at Manhattan Construction Company, 364 and I-44 near Polecat Creek, SAPULPA, OKLAHOMA 74066
on — Paralysis, paraplegia, quadriplegia, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee was putting a bridge beam in place. When the beam struck the pier, the employee who was holding a 4 x 4 to cushion the beam was knocked off the pier and fell over 40 feet to the ground, resulting in two broken arms and a fractured back that left the employee paralyzed from the waist down. The employee's harness was not connected at the time.
HospitalizedBack, including spine, spinal cord, unspecifiedPiers, wharfs
More severe injuries at Manhattan Construction Company
At 11:00 a.m. on June 14, 2019, an employee of Manhattan Construction Company (MCC) and an employee of Centennial Moisture Control were in a yard when a piece of corrugated metal decking fell onto them from about 140 feet above, knocking them to the ground. The MCC employee suffered significant facial trauma and was hospitalized.
An employee was performing an inspection of the seed warehouse when they fell 30 feet from a catwalk to the ground. The employee sustained facial injuries and a compound fracture to the left femur.
An employee was on a cherry picker approximately 30 feet high, selecting boxes of merchandise from warehouse racking to place onto a pallet. The employee fell and sustained neck and back injuries.
On November 6, 2023, an employee was installing roofing materials on a multi-residential construction site 35 feet above ground level. The anchor on the employee's personal fall arrest system became unattached and the employee fell to the ground. They sustained multiple fractures.
On October 12, 2023, an employee was stacking insulation on a roof when they fell 35 feet through a skylight to the concrete floor below. The employee sustained an ankle and pelvis fracture.
On the fifth or sixth floor deck, an employee was supervising iron workers who were measuring to place rebar. The employee was struck by a wooden tool box that was being lifted by a tower crane. The employee then struck a wooden fence and fell approximately 50 feet to the ground. The employee sustained fractures to both legs and lacerations.
More severe injuries in this industry (NAICS 236210)
An employee was fixing a broken purlin at a worksite when they fell from the framing to the concrete floor approximately 19 feet below. The employee sustained brain bleeding and fractures to their face, vertebrae, and wrists.
Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.
An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.
The injured employee was training a new employee on a dough machine. She went to show where the batter comes from and her right index fingertip was cut. The employee sustained an amputation to the fingertip. The machine was not guarded at the time of the incident.
An employee was operating a roller machine on a dirt slope when the machine hit a bump and fell onto it's side. While trying to get free of the falling machine, the employee's legs were pinned by the top bar of the cage. The employee was hospitalized and his left leg was amputated. He also sustained fractures to a hand and finger.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.