Federal OSHA recorded a severe workplace injury
at Goodman Manufacturing Company, L.P., 19001 Kermier Rd., WALLER, TEXAS 77484
on — Cuts, lacerations, affecting the multiple body parts, n.e.c..
Final narrative
The injured employee was parked in a tugger. A reach truck driver was relocating a container that was behind a stack of containers. The forks came into contact with the stack of containers, tipping it over onto the injured employee's tugger. The injured employee was hospitalized with lacerations to both hands and the right side of their face.
HospitalizedMultiple body parts, n.e.c.Forklift, order picker, platform truck-powered
More severe injuries at Goodman Manufacturing Company, L.P.
An employee was working at a die transfer system when their finger became caught between the crossbar and the edge of the die in the transfer system. The employee sustained a finger amputation.
An employee was removing material from a container when the material shifted, causing his right pinky fingertip to be caught between the material and the wall of the container. The employee sustained a partial amputation to the right pinky fingertip.
An employee was putting a bend channel in a sheet of metal using a press brake. The brake actuated and the sheet metal rose up against the brake die, smashing the employee's fingers between the brake die and the sheet metal. The employee suffered a partial amputation of the left middle finger at the last joint.
An employee was applying manifolds to a coil. The coil got stuck on the stopper. As the employee pushed the stopper, the employee's glove was caught between it and the coil. The employee's left middle finger was fractured and partially amputated.
Two employees were walking through the warehouse behind a forklift that was moving pallets of 30-foot metal bottom bars. When the forklift reversed, the top of the forklift struck a box of metal bottom bars on top of racking, causing the box to fall and strike the two employees. They were both taken to the hospital; one employee was treated and released without being admitted. The other employee was hospitalized with a fractured left orbital bone and an injured right knee.
The injured employee was spray painting lay flat shipping reels while another employee was picking up the reels with a telehandler after they were painted. The telehandler bumped a reel, causing other reels to fall. The injured employee was caught between the reels, resulting in broken left femur.
An employee was installing an aerial drop cable across a roadway. The employee was on a ladder positioned against a telephone pole. Cable had been installed on one side of the roadway. The employee was making the connection to the pole on the opposite side of the roadway when a box truck contacted the cable, causing the employee to fall onto the grass of the customer's yard. The employee sustained broken ribs and was hospitalized.
An employee was performing routine housekeeping duties when a bale of plastic bottles slid off the forks of a forklift that was backing out of a trailer. The bale struck the employee, pushing her into another machine. The employee suffered a fractured rib and punctured lung.
An employee was using a 4-by-4 to straighten a pack of wood. A forklift nudged the 4-by-4, which caused the employee's right hand to be caught between it and the pack of wood. The employee suffered a partial amputation to the right ring finger.
More severe injuries in this industry (NAICS 333415)
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was observing expansion rods on a coil expander going into a coil to ensure copper stubs weren't being bent. His left hand was caught between the locking block and locking block clamp on the power press machine, resulting in partial amputation of his left little finger from the distal interphalangeal joint.
An employee was setting up a press brake and rolling over a die when the tip of their left little finger was caught between the horizontal working surface of the press brake and die. The employee sustained partial amputation of their fingertip.
An employee was working to remove an access panel to begin performing maintenance on a machine. The set pins on the bottom of the panel were broken. The bottom kicked out and fell, striking the employee's left foot and resulting in a fracture to the big toe.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.