105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Union Corrugating Company

Struck by object or equipment, unspecified · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at Union Corrugating Company, 3920 Kennedy Rd., JANESVILLE, WISCONSIN 53548 on — Cuts, lacerations, affecting the forearm(s).

An employee was loading a press machine when their left forearm was struck and lacerated by the sheet of corrugated metal that was being loaded. The laceration resulted in tendon damage.

Hospitalized Forearm(s) Sheet metal

Union Corrugating Company

An employee was working on the trim folder machine. The employee's left hand slipped and was caught in the machine resulting in fractures to the index and middle fingers.

Union Corrugating Company

An employee was on the back of his truck unstrapping his load for delivery when he slipped on ice and fell 5 feet to the ground. The employee sustained neck and pack pain.

Union Corrugating Company

An employee was unloading steel roofing panels at a construction site using a forklift with a spreader bar. The mast was fully extended when the forklift tipped forward. The employee's head struck the steel cage, suffering lacerations and a possible orbital fracture.

View Union Corrugating Company's full OSHA safety record →

OTC Ohio Transmission

An employee was checking the function of newly installed actuators when they were struck by a pressurized release pipe. The employee suffered fractures to the orbital socket and shoulder, requiring hospitalization.

Estes Park Trail Gazette

A ramp in the trunk of a delivery van struck an employee's calf. She suffered a broken leg and was hospitalized.

Nucos Pools

An employee was completing a service call and looking at a water pump when the pump cover plate struck their forehead. The employee sustained a forehead laceration and fracture requiring hospitalization.

Reliance Steel & Aluminum Co.

An employee was removing chains from a steel tube. A sorting hook attachment was caught on the staging area cross member. When he raised the chains, the sorting hook snapped back and struck the employee's face causing a fractured jaw.

Southern Parallel Forest Products Corp.

An employee was in the sawmill basement using a push broom and shovel to clean wood chips and sawdust. The employee's right arm was struck by a wooden board between the wrist and elbow, resulting in a fracture.

Channel Sheet Metal, Inc.

An employee was driving a forklift when its right front wheel dropped off a 6-inch curb. The forklift rolled over and trapped him against the concrete surface. He suffered a broken pelvis, ribs, and collarbone, as well as a collapsed lung.

Blackburn's Fabrication, Inc.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

Mason Road Sheet Metal, Inc.

An employee was performing routine maintenance on a shear machine when the machine's foot pedal was engaged and the blade contacted his right middle finger, resulting in a partial amputation.

Rollex Corporation

An employee was helping to tighten down a metal packaging band for shipping. The metal band broke and struck the employee across their face, cutting their left face/eye area. The employee was hospitalized.

Kemlee Manufacturing Inc.

An employee was cutting plywood on a table saw. They went to retrieve a piece of wood and the saw blade partially amputated a fingertip.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.