Fall from collapsing structure or equipment, unspecified · Intracranial injuries and injuries to internal organs
At a glance
Federal OSHA recorded a severe workplace injury
at Service King Manufacturing Inc, 354520 HWY 66 W, STROUD, OKLAHOMA 74079
on — Intracranial injuries and injuries to internal organs, affecting the head and trunk.
Watch Service King Manufacturing Inc — freeGet an email when a new federal OSHA severe-injury report for Service King Manufacturing Inc is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee had been welding on a jig/platform on the side of a mast. When the employee stepped off the jig and onto the platform, it tipped over and fell, pinning the employee to the ground. The employee suffered a collapsed lung, internal bleeding near the left kidney, and brain swelling.
HospitalizedHead and trunkScaffolds-staging, unspecified
An employee was on a step ladder applying glue to a panel when the ladder fell apart, causing the employee to fall to the floor. The employee sustained rib fractures.
On December 5, 2023, an employee was loading product onto a freight elevator when the elevator fell with the employee inside. The employee sustained a right leg injury.
On 11/28/2023, an employee was loading a cart with supplies to be delivered to a restaurant. He stepped onto a ramp to get into the back of a truck but the ramp fell to the ground, causing the employee to fall as well. The employee was hospitalized with a fractured ankle.
An employee was climbing a 16-foot fiberglass extension ladder to access a roof so they could take measurements for a roofing quote. The employee had partially ascended the ladder when the ladder broke in half. The employee's foot was caught in a ladder rung resulting in an ankle fracture that required surgery.
An employee was replacing a heating, ventilation, and air conditioning (HVAC) valve in a ceiling while standing on a ladder. The ladder collapsed while the employee was descending, causing them to fall to the floor. The employee sustained a broken wrist.
More severe injuries in this industry (NAICS 333132)
Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.
An employee was fitting an arbor fixture into a rotor housing to be reworked. The rotor is moved by a hoist. The arbor was being lowered into the rotor housing when the arbor slipped down onto his hand and amputated a portion of his left thumb.
A crew was tripping out of the hole with an electrical submersible pump (ESP) in the process of swapping tubing tong heads to break down the ESP. An employee's left arm was caught and pinched by the tubing tongs. The employee sustained three lacerations and a fracture to the arm.
On May 21, 2025, at approximately 3:40 PM, a machinist was preparing a CNC lathe machine for it's next run. He was closing the machine door to complete the tooling setup when the door crushed his right middle finger. The employee required a surgical amputation to his fingertip.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.