Ran off driving surface, nonroadway · Paralysis, paraplegia, quadriplegia
At a glance
Federal OSHA recorded a severe workplace injury
at Frito-Lay Inc, 2350 Northridge Drive, KAUKAUNA, WISCONSIN 54130
on — Paralysis, paraplegia, quadriplegia, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee was loading products onto an empty trailer from an elevated dock using a standup forklift. As the employee was backing out of the trailer and heading back toward the dock, the trailer shifted away from the dock approximately six feet. The lift fell from the back of the trailer and became stuck between the dock and the trailer and was left suspended. The employee was struck against the dock plate as a result of the fall resulting is severe damage to the head, spine, trachea, and back and paralysis.
HospitalizedBack, including spine, spinal cord, unspecifiedForklift, order picker, platform truck-powered
An employee's right middle fingertip was caught between a chain and a sprocket in a machine. The fingertip was amputated. The machine was unguarded at the time.
An employee was working to clear a jammed box in a box drop area. The employee's left thumb was caught and amputated between a box drop tray and a support bar.
An employee slowed his forklift in a warehouse aisle as another forklift turned from an intersecting aisle. The employee's left arm was pinned between the two forklifts. The employee developed compartment syndrome.
An employee adjusted a pallet on racking and was walking back to their parked stand-up forklift when they were struck by another stand-up forklift. The employee fell into the racking system and sustained a fractured pelvis and ribs.
An employee was walking while doing product inventory. The employee slipped and fell on metal decking and sustained a laceration to their left shin and calf area. The employee required hospitalization and surgery.
On November 17, 2023, an employee was unloading a trailer using a forklift when the truck drove away, causing the employee and the forklift to drop to the ground. The employee suffered back injuries that required hospitalization.
An employee was driving a golf cart when its left leaf spring cracked, causing the cart to abruptly turn left into a nearby ditch. The employee suffered three fractures in his right leg below the knee, as well as severe lacerations on his head and forehead.
An employee was operating a forklift to unload a truck when the truck pulled away. The forklift and the employee fell approximately 3.5 feet. The employee sustained fractures to the arm and neck as well as a head contusion.
An employee was moving a scissor lift onto a loading dock ramp when the lift fell over the side of the ramp with the employee in it. They sustained rib fractures.
An employee was operating a forklift and unloading a trailer when the trailer pulled away from the dock. The forklift rolled backward and fell out of the trailer. The employee sustained head trauma and a back injury.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.