TULSA, OKLAHOMA—
Valmont Industries, Inc.
Struck by falling object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Valmont Industries, Inc., 801 N Xanthus Ave., TULSA, OKLAHOMA 74110 on — Fractures, affecting the lower leg(s).
Final narrative
An employee was using an overhead crane to retrieve a pole from the center of a square tube stack, stacked about 3 feet high. She noticed the pole was uneven and positioned herself between the square tube and the pole cart to begin adjusting the sling. As she began to adjust the sling to find the pole's center of gravity, the pole struck the tube and caused it to fall on her lower right leg. Her tibia and fibula were broken.
More severe injuries at Valmont Industries, Inc.
CLAREMORE, OKLAHOMA—
Valmont Industries, Inc.
An employee was working to remove waste wire between two boat rack/spreader bars (10 feet in length, 8 inches wide, and 16 inches tall, with a center lifting point for a crane hook) in the hanging department. One boat rack was leaning on another boat rack. The employee reached between the boat racks to move the leaning boat rack and remove the waste wire. The leaning boat rack shifted and the employee's left index finger was pinched between the two racks (weighing approximately 600 pounds each). The employee sustained an abrasive amputation of the left index fingertip from the nailbed up.
TULSA, OKLAHOMA—
Valmont Industries, Inc.
An employee was rigging equipment at a manufacturing site. He was rigging a chain sling with a hook to lift up machine paneling and access the linear bearings. The chain sling hook slipped, went into the air, and struck the employee on the head, resulting in a skull fracture and brain bleed.
VALLEY, NEBRASKA—
Valmont Industries, Inc.
An employee was preparing to engage a tube line saw to cut a tube. Once the saw blade lowered and made contact with the tube, the tube jolted and pinned the employee s hand against the stop gate. As the employee's hand was caught, the tube kept rotating due to the momentum of the spinning the blade. The end of the tube cut the employee s right index finger, resulting in an amputation.
BRENHAM, TEXAS—
Valmont Industries, Inc.
An employee was using an overhead crane to move a 48-inch by 3-inch plate from a horizontal position to a vertical position. He had one hand on the controller and one on the clevis. When the employee let the clevis down to reposition it, his left index fingertip was pinched between the crane hook and the clevis, resulting in an amputation.
VALLEY, NEBRASKA—
Valmont Industries, Inc.
An employee's right ring fingertip was caught and injured between a large roll pin and a roller.
View Valmont Industries, Inc.'s full OSHA safety record →
Similar incidents · Same event type
PORT ALLEN, LOUISIANA—
Performance Contractors, Inc.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
KIRKSVILLE, MISSOURI—
WIRECO WORLDGROUP, INC.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
GREENSBURG, PENNSYLVANIA—
Owens & Minor - Pittsburgh Distribution Center
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
FORT BLISS, TEXAS—
Retro Tech Systems
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
ORLA, TEXAS—
Creston Energy Group
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 332999)
ALLENTOWN, PENNSYLVANIA—
Stanley Black & Decker, Inc.
An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.
INGLESIDE, TEXAS—
Jamestown Metal Marine Sales, Inc.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
AUSTIN, TEXAS—
Architectural Metal Solutions, Inc.
An employee was installing a door from an A-frame ladder. He fell from the ladder, landed on his feet about 8 feet below, and suffered a broken tibia.
FALL RIVER, MASSACHUSETTS—
Spectrum Lighting, Inc.
An employee was leaving the building at the end of the day when she missed a step and fell, fracturing her right foot.
TOMBALL, TEXAS—
Metal Zinc, LLC
Two employees were running a CNC folder machine. The injured employee went to adjust the metal and the machine came down, crushing her forearms. Her left arm was fractured and both arms required stitches.
More severe injuries in OKLAHOMA
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
EL RENO, OKLAHOMA—
U.S. Department of Justice/Federal Bureau of Prisons/Federal Correctional Institution-El Reno
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
BARTLESVILLE, OKLAHOMA—
Edward Jones Investments
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.