Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Franklin Manufacturing, Inc., 15825 Hwy 243, RUSSELLVILLE, ALABAMA 35653
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was testing the pneumatic cylinder and gears in a centering device before installing the housing cover. The employee placed his hand on the assembly to steady it, and the cylinder severed the tip of his left fifth finger. The employee's finger was amputated at the distal joint.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 333517)
An employee was standing on some large wooden storage crates, adjusting a tarp to cover them. He fell from the crates to the parking lot ground, landed on his left side, and suffered several broken ribs. He was hospitalized.
An employee was remotely operating a 25-ton gantry crane with a magnet attachment to unload a steel plate (approximately 96'' x 280'') from a semi-truck to the ground in the steel yard. The plate struck the employee as it was being moved, resulting in three fractures to his right arm that required hospitalization and surgery.
An employee was polishing a guide pin using a CNC lathe when his left glove got caught on the chuck or tool and three of his fingers were pulled in. The employee was hospitalized and underwent reattachment surgery for finger amputations.
On May 2, 2025, two employees were lifting a pallet jack with a built-in weight measuring plate into the bed of a truck when the plate shifted as they were lifting it. The plate crushed and severed the injured employee's middle and ring fingertips. A fingertip was amputated.
An employee was cleaning a camera lens on a wheel dresser, a machine used to correct the shapes of grinding wheels. The employee's right index finger was caught between the wheel dresser and the grinding wheel being serviced. The fingertip was amputated at the first joint.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.