Caught in running equipment or machinery, unspecified · Avulsions, enucleations
At a glance
Federal OSHA recorded a severe workplace injury
at Future Foam, Inc., 8430 Murphy Dr., MIDDLETON, WISCONSIN 53562
on — Avulsions, enucleations, affecting the hand(s), unspecified.
Final narrative
An employee was trying to adjust something in a machine when the machine pulled him in. His hand and arm were crushed by two rollers, and he suffered a partial degloving to the hand.
HospitalizedHand(s), unspecifiedMetal, woodworking, and special material machinery, unspecified
A temporary employee fell from a board to the ground about 5 feet below. The board was on top of a retracted scissor lift. The employee was hospitalized, having suffered a broken hip that required surgery.
An employee was standing to the back, left side of a forklift that was moving totes. The forklift operator backed up and ran over the employee's right foot, breaking his fibula.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
On July 22, 2025, an employee was cutting/torching a large piece of metal when a piece of the material broke loose, struck him mid-stomach, and knocked him to the ground. The employee was hospitalized with an umbilical hernia and fractures to his right femur and left fibula.
An employee was feeding material through a pinch roller. There was a line break and the employee was working to clear out the line. The closed roll grabbed his glove and pulled his entire arm through the machine. The employee sustained compartment syndrome and a broken fingertip requiring hospitalization.
An employee hooked up two bundles of steel tubing to be lifted with an overhead crane. He stumbled while walking and operating the crane and his right hand contacted the crane's pulley mechanism. The upward motion of the crane caused the cable to pull his finger into the pulley. The employee's fingertip was partially amputated.
The employee was operating a peeler machine when his left hand got caught against the log that was being peeled. The employee was hospitalized with lacerations to the fingers on his left hand that required stitches.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.