Caught in running equipment or machinery during maintenance, cleaning · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Artemax Inc., 16000 West Rogers Drive, NEW BERLIN, WISCONSIN 53151
on — Crushing injuries, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was clearing a jam in a press roller when their right hand became caught in the roller, resulting in crush injuries to their middle, ring, and little fingers. The machine was not guarded at the time.
On July 31, 2017, an employee's hand was crushed while reaching into a machine to make an adjustment. The employee received an amputation to the right hand.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 339999)
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.
An employee was climbing an 8-foot ladder to clean windows on a house. The employee was reaching to the right when they lost their balance and slipped. The employee fell and their foot became caught in the ladder rungs, causing both the employee and the ladder to fall to the ground. The employee sustained a fracture to the right leg requiring hospitalization and surgery.
An employee was offloading material using a forklift when the hoisted material began shifting. The employee went to manually stabilize the load and their right middle fingertip was pinched and amputated.
An employee was packing candles on a line. They reached down to pick up a 12-pack of candles when their right little finger was caught in the conveyor belt, resulting in an amputation at the distal joint.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.