U.S. Air Force, Warner Robins Air Logistics Complex
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at U.S. Air Force, Warner Robins Air Logistics Complex, .S. Air Force, Warner Robins Air Logistics Complex (WR-ALC), 402d Electronics Maintenance Group, WARNER ROBINS, GEORGIA 31098
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was inspecting and testing an aircraft antenna gimbal. The employee was using a screwdriver to replicate a failure by tapping a wire bundle located under the head of the gimbal. The head of the gimbal rocked down, causing a laceration to his right middle finger. The employee's finger sustained a partial amputation.
AmputationFinger(s), fingernail(s), n.e.c.Audio and video equipment, n.e.c.
More severe injuries at U.S. Air Force, Warner Robins Air Logistics Complex
An employee relocated a stair stand with a tow tractor and was working to disconnect the tow tractor from the maintenance stand. The employee was manually operating the tractor's throttle to reverse and relieve pressure on the pintle hook. The tractor unexpectedly lurched forward, trapping the employee s left ring fingertip between the tractor s pintle hook latch and the maintenance stand s tow plate. The fingertip was partially amputated without loss of bone.
An employee entered the cargo area on an aircraft to inspect the ceiling under the wing when they stepped into an open hole from a missing aircraft floor board. The employee twisted his right ankle, resulting in a dislocation.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 928110)
An employee was activating the sprinkler system at a sports complex following recent maintenance to repair leaky pumps. When the system was activated, a section of newly installed 3-inch schedule 80 PVC pipe struck the employee, who lost consciousness. The employee suffered a broken jaw and a concussion.
An employee was ascending a flight of stairs after exiting their vehicle in an adjacent employee parking lot. The employee stepped to the right to avoid another employee on the left who was descending the stairs. The employee lost their balance and fell on the stairs. They were hospitalized with a laceration/abrasion to their chin, a fractured left humerus, and bruising to their left knee.
At about 3:10 p.m. on October 3, 2025, an employee was inspecting a car. Two dogs that had been in another car were leashed and tethered to a bollard. As the employee inspected the first car along with a narcotics detection dog, one of the other dogs came loose and attacked the narcotics dog. The employee was separating the dogs when the other dog bit his left ring finger. The last joint of the finger was injured and part of it was bitten off.
An employee was climbing a fixed ladder to perform maintenance in an attic. While unlocking the attic entry, the employee fell from the ladder more than 10 feet to the concrete below. The employee suffered a fractured hip, pelvis, tail bone, arm, and elbow, resulting in hospitalization and surgery.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.