Performance Contracting, Inc.

An employee was on a scissor lift while marking a ceiling with a tool so they could cut control joints. The counterweight of a boom lift struck the scissor lift as it rotated, knocking the scissor lift over. The employee fell 14 feet. The employee sustained a femoral neck fracture to their left femur, fractures to three vertebrae, a pelvic fracture, a fracture and dislocation to their left wrist, and scrapes to their left elbow and wrist. The employee was hospitalized.

An employee was installing insulation while on a ladder. He fell approximately 8 feet to the floor and fractured his right femur.

An employee was cleaning coal build-up inside pulverizers that were 10 feet 3 inches wide and contained three stationary rollers. After dislodging a piece of coal, the employee exited the pulverizers when the converging floor moved and their left leg was caught between one of the three rollers. The employee suffered injuries including a laceration to the lower left thigh and multiple fractures to the lower left leg. The motor to the converging floor was not in place at the time of the incident.

An employee fell from a rolling scaffold to the ground, resulting in a fractured fibula.

An employee was using the hose of a vacuum truck to vacuum up oily water when their hand was sucked into the hose. The employee was hospitalized with a muscle injury.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was closing a rear trailer door in the parking lot when they were struck by a forklift. The employee's lower left leg was crushed between the pallet on the forklift and the trailer. The employee sustained muscle damage to their lower leg.

An employee was cutting wood with a circular saw. The machine lagged and cut the employee's finger. The employee required surgical amputation of the finger at the hospital.

An employee was climbing a 12-foot ladder when he lost his balance and fell from the eighth rung to the ground. He sustained multiple broken ribs, which caused lung punctures.

An employee was installing spray-on fire proofing from a scissor lift. The scissor lift tipped over and the employee fell, resulting in multiple fractures to their leg, shoulder, and skull.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.