Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at RDO Equipment Co., 2902 North Central Expressway, MC KINNEY, TEXAS 75069
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was lifting a hydraulic cylinder into place. The pry bar being used slipped and caused the cylinder to pinch his left little finger resulting in a partial amputation. The employee required hospitalization and surgery.
HospitalizedAmputationFinger(s), fingernail(s), unspecifiedParts and materials, unspecified
On April 11, 2025, an employee was helping remove the rear axle of a wheel loader using a dolly. As the axle was being pushed out, it rolled off the dolly and landed on the employee's left little finger. The finger was amputated.
An employee was installing a post-less wing assembly (for snow removal) onto a motor grader. While aligning holes to mount the assembly, his right middle finger was caught in a pin hole when the blade came loose, resulting in partial amputation of the finger.
An employee was using a prybar to realign drill rods in a rod basket. The basket tipped and the rods dropped out, crushing the employee's right forearm.
An employee was accessing a leaking valve on the underside of a planter. The employee had to bend/contort their body in order to get in position to block up the valve. While putting the valve back together, the employee experienced abdominal pain and nausea. The employee sustained a hernia.
An employee was bleeding residual pressure off a hydraulic line on a tractor and held a metal bracket in front of his face to avoid being splashed with small amounts of hydraulic oil. When pressure was released, it hit the metal bracket and forced it into the employee's face, fracturing his jaw and knocking out a tooth.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 423810)
An employee was working on a 6-foot ladder that was leaned against a gas compression engine. The ladder feet slipped on the working surface, causing the ladder to become unstable. The employee fell off the ladder and suffered bilateral wrist fractures.
An employee was reinstalling an idler weighing approximately 400 lbs. on a bulldozer when the idler shifted slightly, pinching the employee's finger. The employee sustained an amputation.
An employee was filling a pressure washer with gasoline when the vapors ignited, resulting in the employee suffering burns to his face, hands, and arms.
An employee was preparing to unload freight from the liftgate of their truck while at a client location. They stepped into a pothole and fell onto their left side, resulting in a broken hip that required hospitalization and surgery.
An employee was using a torch to remove a broken bolt from inside a roller drum. Prior to this, brake cleaner had been used inside the roller drum. The employee was inside the roller drum when a flash fire occurred and the employee sustained burns to their face and arms.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.